Alarms - GE Security DVMRe Matrix User Manual

•
If the alarm or record email option is enabled in the Email Notification Setup Screen, an email will
be sent indicating that a disk failure occurred.
Main Menu → Record → Record Lock
q
Use this menu to set the Record Lock feature. This feature disables the front panel
record button. Setting Record Lock to ON will start the unit recording if it is not currently
in the Record mode.
Main Menu → Record → Auto Delete Mode
q
The ADM feature prevents the unit from displaying or archiving any search results that are more than
thirty days old. This feature may be required by law in some jurisdictions. Choose from 1 to 99 days or
Off. The default setting is Off.
ADM Setting
99

3.11 Alarms

Use this menu to configure the alarm handling features of the unit.
Caution! The DVMRe Matrix's primary function is to furnish video
multiplexing and recording with a multiscreen display. Although
the unit has alarm handling and motion detection functions, these
are considered secondary features. This unit should not be the
only alarm device on site.
Main Menu → Alarms → Input Configuration
q
Configure the alarm inputs as either Normally Open or Normally Closed.
Configure inputs as follows.
Normally Open Zero Potential Relay Contact: Configure in menu as
Normally Open.
Normally Closed Zero Potential Relay Contact: Configure in menu
as Normally Closed
TTL Active High: Configure in menu as Normally Closed.
TTL Active Low: Configure in menu as Normally Open.
Open Collector Active On: Configure in menu as Normally Open.
Open Collector Active Off: Configure in menu as Normally Closed.
0150-0242D
Days
42
Message
ADM will change. Are you sure?
Yes
OFF
ON
Input Configuration
Alarm Latch
Alarm Action
Alarm Record Mode
Enable / Disable
Alarm History
Link to a Macro
Fullscreen Alarm
Relay Configuration
Buzzer Setup
Videoloss Action
Pre Alarm Duration
Notification
Archive Alarms
GE Security DVMRe Matrix