Advertisement
Setting the Clock
Setting Continuous Bake or 12 Hour Energy Saving
Timer
Flex
The Set/Offand Clean pads control
the Continuous
Bake or 12 Hour Energy Saving features.
The oven control
has a factory
preset built-in
12 Hour Energy Saving feature that will shut off the
oven
if
the oven control is left on for more than 11 hours
and 59 minutes. The oven can be programmed
to override
this feature
for Continuous
Baking.
INSTRUCTIONS
PRESS
DISPLAY
To set the control far Continuous
Bake or 12 Hour Energy
Saving features
Timer
1.
Press and hold Set/Offfor 7 seconds (Fig. 1). After 7 seconds "12Hr
OFF" or "STAY On" will appear
in the display
and the control
will
beep once (Fig 2 or 3).
Flex
2.
Press Cleo0 to switch between
the 12 Hour Energy Saving
and
continuous
bake features.
Note: "12Hr OFF" (Fig. 2) in the display
indicates the control is set for the 12 Hour Energy Saving mode
and "STAY On" indicates the control
is set for the Continuous
Bake
.
feature
(Fig. 3).
Press @
to accept
the change
(Fig. 4; display
will return to time
of day) or press @
to reject the change.
Timer
Set/Offfor 7 seconds
Fig. 1
Flex
Clean
Fig. 2
or
Fig. 3
@
Fig. 4
Setting
Kitchen
Timer
Timer
The Set/Offpad controls the Kitchen Timer feature.
The Kitchen Timer serves as an extra timer in the kitchen
that will beep
when the set time has run out. It does not start or stop cooking.
The Kitchen Timer feature
can be used during
any of the
other oven control
functions_ except during
a self-clean
operation.
Refer to "Minimum
and Maximum
Control Pad Settings"
for time amount settings.
INSTRUCTIONS
PRESS
DISPLAY
To set the Kitchen
Timer
(example:
5 mlnufes)
Timer
1.
Press Set/Off(Fig. 5).
2.
Press the number
pads to set the desired time in the display
(example
5). Press _.
The time will begin to count down in the
display
(Fig. 6). Note: If _
is not pressed the timer will return to
the time of day after 30 seconds.
3.
When the set time has run out° "End" and "TIMER"
wiii show in
the display
(Fig. 7). The clock wiii sound with 3 beeps every 7
Timer
seconds
until Set/Offis pressed.
To cancel the Kitchen
Timer
before the set tlme has run out
Timer
Press
Set/Off.
The display
will return to the time of day.
Timer
Set/Off
Fig. 5
5@
Fig. 6
Timer
Set/Off
Fig. 7
To Set Acid I Minute
Feature
Add
I
Add
1
The Minute pad is used to set the Add 1 Minute
feature.
When the Minute pad is pressed_ 1 minute is added
to the Minute Timer
Add 1
feature
if this feature
is already
active.
If the Minute Timer feature is not active and the Minute pad is pressed_ the Minute
Timer feature
will become
active and will begin counting
down from 1 minute.
For further
information
on how to set the
Minute
Timer feature see To Set the Minute
Timer instructions
above.
14
Advertisement
