Topfield SBP-2001CI+ User Manual page 40

36 Preference Settings
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 4.1.
3. To get Greenwich mean time, set the GMT Collection op-
tion to one among the followings:
Normal from all transponders
CAS Only from transponders of pay services
User Select from transponders specified by you
If you set it to User Select, then the Satellite option and
the Transponder option become enabled. Select your de-
sired satellite and transponders at those options. With
the above settings, the digital receiver will scan all speci-
fied transponders one by one until it gets the Greenwich
Mean Time.
4. Make sure that your local time is correctly displayed on
the Local Time item.
To set the local time manually, set the Mode option to Man-
ual and enter your local time to the Local Time option with
the numeric buttons. The time format is day/month/year 24-
hour:minute. To change the time format to 12-hour format, set
the Time Format option to 12 Hours.
If daylight saving time is observed in your state at the moment,
set the Daylight Saving Time option to On.
NOTE
Daylight saving time adds one hour to the time when the op-
tion is set to On. When setting the time offset from Green-
wich Mean Time, make sure that time offset does not include
daylight saving time.