Local Time Setting - Topfield SBP-2001CI+ User Manual

4.3 Local time setting

The digital receiver can output two types of digital audio sig-
nals via the S/PDIF output. One is an encoded signal, and
the other is a decoded signal. If you have the digital receiver
linked to your audio-video receiver via the S/PDIF output, you
have to set the Dolby Digital option to Off, which means that the
digital receiver will output encoded Dolby Digital audio with-
out decoding so that your audio-video receiver can decode it.
Otherwise, set it to On, then the digital receiver will output
decoded Dolby Digital audio, scaling it down to two channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
You should set your local time for timer events. If you do
not set the local time correctly, the programme time table pro-
vided by the programme guide may be distrustful. For the pro-
gramme guide, refer to §5.3.
1. Set the Mode option to Auto, then the Time Offset option
becomes enabled.
4.3 Local time setting 35
Settings > Time
Select the
menu. You should see a screen
like the left figure. You can set
the clock manually or use the
time signal, Greenwich Mean
Time (GMT), carried as part of
the digital television broadcast.
To use Greenwich Mean Time,
take the following steps: