Using This Unit With Mac; Changing The Sound Settings - Yamaha PJP-10UR Quick Start Manual

System Requirements
Use a Mac that meets the following
requirements.
• OS: Mac OS 10.5 (Leopard)
• CPU: Intel processor
• Memory: 256MB or more
• USB port: USB1.1 or later (USB2.0
recommended)
Notes
• You cannot connect multiple microphone
speaker devices including this unit to the Mac
at the same time.
• Connect this unit and the Mac directly.
Connecting them through a USB hub may
cause problems in operation.
• Audio reproduction may be interrupted
depending on the Mac usage situations
(workloads or available memory space).
Connection
1
Connect this unit to the Mac
using the supplied USB cable.
The USB driver is automatically installed on
the Mac.
Note
Stand this unit on a flat surface and face the
speaker side toward your position.
16 English

Using this unit with Mac

y
• You do not need to install the USB driver
separately because this unit is recognized as a
basic audio device by the Mac.
• The microphones of this unit pick up audio
mainly from the speaker side direction. Use
this unit at the position where the speaker side
of this unit faces your position.

Changing the sound settings

You need to change the sound settings when
using this unit with Mac.
1
Click the Apple menu and select
"System Preferences".
The "System Preferences" screen appears.
2
Click "Sound".
3
Click the "Output" tab.
Click