Appendix F: Universal Console Model Config - True Fitness TREADMILL 2011 Service Manual

APPENDIX F: UNIVERSAL CONSOLE MODEL
A. 11" CONSOLE MODEL CONFIGURATION
1. Press and hold the STOP key for approximately 4 seconds.
2. The Display will blank out. Immediately release the STOP key. Press
and hold the SPEED + key.
3. Display will read "ENTER ACCESS CODE". If "ENTER ACCESS
CODE" does
not display, then repeat steps 6 and 7.
4. Within 5 seconds, enter access code 48362. Press ENTER key on
main display. Display will show
"READING CONFIG".
5. After a few seconds, one of four model numbers will display. See list
at top of page.
6. Use the SPEED + or – keys to scroll through the model selection list
to select your specific model with or
without the decline foot option.
7. After selection, push the START key.
8. Display will briefly display "UPDATING"
9. Do not hit any other keys. Turn Treadmill power switch OFF and then
turn power ON.
10. Calibrate treadmill per the Treadmill Calibration procedure within
Console Assembly Instructions
Proprietary & Confidential Proprietary & Confidential
TRUE Fitness Technology, Inc. TRUE Fitness Technology, Inc.
CONFIGURATION PROCEDURE
Tread Service Manual - July 2011
54