2. Double-click on the
Frames
directory.
> You will access the content of the frame.
You can also transfer your images on a peripheral
connected to frame.
3. Transfer the pictures into the
Internal Memory
Using the Bluetooth function
Pairing the frame with your phone
Depending on the model of your phone / computer,
this phase might be optional. However, it will enable
you to send your photos to the frame more quickly.
1. Ensure that Bluetooth is activated on the frame.
To do so, press the central button and select
Bluetooth > Enabled.
2. Activate Bluetooth on your phone / computer then search
for Bluetooth devices. Refer to the user guide of your
device for more information.
3. Select Parrot_Specchio in the list of Bluetooth devices
proposed by your phone / computer.
4. On your phone / computer, enter the code 0000.
> Your two devices are now paired.
Sending pictures from a Phone or PDA via Bluetooth
1. Ensure that Bluetooth is activated on the frame.
To do so, press the central button and select
Bluetooth > Enabled.
2. Activate Bluetooth on your phone / PDA.
file.
3. On your phone/PDA, go to the Pictures menu. Select a
picture and choose «Send via Bluetooth». Your device
starts searching for Bluetooth peripherals.
4. Once the search has finished, select Parrot_Specchio.
5. If your device prompts you to enter a code, type 0000.
> The picture is then sent to the frame.
Several pictures can be sent at a time, though this
feature will depend on your device.
Settings >
Using the frame with an NFC phone
To send a picture to the frame from an NFC phone:
1. On your phone, select the picture you want to send.
2. Touch the frame with your phone:
- on the top left of the frame if it is in landscape mode
- on the top right of the frame if it is in portrait mode.
> A confirmation message is displayed on your phone.
3. Select
Yes.
Settings >
13