Receiving Pictures By Email - Parrot Martin Szekely Specchio Quick Start Manual

2. Select Configure.
> A Wi-Fi network search is launched.
3. Select your network from the provided list or select
Others to configure your network manually.
4. Enter your WEP or WPA code using the virtual keyboard
then select OK.
> You are now connected to your Wi-Fi network.
> Once the connection has been established, a window
appears containing all the information relating to the
Wi-Fi connection.
• Once the connection has been established, you have the
possibility to activate / deactivate the connection. You
can do that by selecting Settings > Wi-Fi > Connection >
Activate / Deactivate.
Accessing the web interface
In order to access the web interface, make sure that
your PC is connected to the same Wi-Fi network as
the frame.
1. Read the IP address assigned to your frame. To do so,
Settings > Info.
select
2. Launch your web browser and enter the IP address
in the address bar.
► Refer to the Connecting the frame to a Wi-Fi network
section for more information.

Receiving pictures by email

We advise you to create a specific email address
for your frame.
►For more information about the compatible mail
servers, refer to our website
www.parrot.com, compatibility section.
1. On the web interface, click on
Email account
2. In the space, click on
associate an email address with frame.
3. Enter your connection identifiers in the
corresponding fields. Refer to your email service
documentation for information on the server and the
protocol.
> All the pictures that you receive on this email account
from now on can be accessed via the frame, by selecting
Route > Directory > Email.
You can also associate an email address directly
from the frame. To do so, select
Email > Add an Email account.
.
New
to
Settings > Wi-Fi >
11