Kenmore 587.1415 Series Use & Care Manual page 8

Operating Instructions
Vent
Latch X
o,J_, _6u/_ _
Appearance may vary from your model.
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4.
,
,
7.
Turn dial clockwise to select cycle (See
Cycle Chart) or number of hours for wash
delay.
Select desired OPTIONS (See Option
Selections). The indicator will show red
when selected.
If using WASH DELAY, go to step
number 8.
Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
Plate Warmer
For warming dishes and serving plates before serving
hot foods:
• Load clean plates and dishes to be warmed.
• Turn dial to PLATE WARMER.
• Select HEAT DRYoption.
Status Indicator Lights
When DELAY START option is selected, the Delay Start
light will glow as timer counts down to begin cycle.
The WASHING LIGHT comes on at the beginning of the
cycle and remains on until the end of the main wash.
CLEAN light comes on when a cycle is complete. To
turn it off, turn dial slightly until light goes off.
8. To start, close door to latch.
Wash Delay
Allows you to delay starting the HEAVY WASH cycle.
• Turn dial to select number of hours.
• Select HIGH TEMP WASH option and other desired
options.
• CIosedoortolatch.