Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-TG1611BX Operating Instructions Manual

TG161xBX(e).book Page 11 Wednesday, October 19, 2011 8:45 AM

Making calls

1
Lift the handset and dial the phone
number.
L To correct a digit, press {C}.
2
{C}
3
When you finish talking, press {ic} or
place the handset on the base unit or
charger.
Adjusting the receiver volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
{4} (R)
2
{r}: Select the desired phone number.
L When the number matches a phone
number stored in the phonebook, the
stored name in the phonebook is
displayed.
3
{C}
Editing/erasing/storing numbers in
the redial list
1
{4} (R)
2
{r}: Select the desired phone number.
s {j/OK}
3
Proceed with the desired operation.
■ Editing a number before calling:
{r}: "Edit & Call" s {j/OK} s
Press {3} or {4} to move the cursor.
s Edit the number. s {C}
■ Erasing a number:
{r}: Select "Erase" or "Erase All".
s {j/OK} 2 times s {ic}
■ Storing a number to the
phonebook:
{r}: "Save TEL No." s {j/OK}
s To store the name, continue from
step 3, "Adding entries", page 13.

Making/Answering Calls

Note:
L When editing:
– To erase a number, place the cursor to
the right of where you want to erase the
number, then press {C}.
– To insert a number, place the cursor to
the right of where you want to insert the
number, then press the appropriate dial
key.
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 13).
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
z s {P}
2
Dial the phone number. s {C}
Note:
L A 3 second pause is inserted each time {P}
is pressed. Repeat as needed to create
longer pauses.

Answering calls

1
Lift the handset and press {C} when the
unit rings.
L You can also answer the call by
pressing any dial key from z to 9, *,
or y. (Any key answer feature)
2
When you finish talking, press {ic} or
place the handset on the base unit or
charger.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press {C}. To turn this feature on,
see page 16.
11