Quick Setup; Profile - TP-Link TL-WA860RE User Manual

TL-WA860RE
Wireless Connection – It shows whether the Range Extender is connected to the Main

Router/AP by Wireless.
IP Address –The IP address of the Range Extender.

Type – The Range Extender's IP address Type.

Signal Received From Main Router/AP - This is the signal strength the Range

Extender received from the Main Router/AP.
Wireless Rate To Main Router/AP - This is the real wireless rate between the Range

Extender and the Main Router/AP.
Main Router/AP Info - This part shows you the current information of the Main Router/AP.

WiFi Name - This is the WiFi name of the Main Router/AP (The Main Router/AP is

usually your router or access point or gateway).
MAC Address - The MAC address of the main Router or AP.

Internet Access - It shows whether the Main Router/AP has access to the Internet.

System Up Time - The length of the time since the device was last powered on or reset.

Firmware Version - This field displays the current firmware version of the Range Extender.

Hardware Version - This field displays the current hardware version of the Range Extender.

Click the Refresh button to get the latest status and settings of the device.

4.2 Quick Setup

Please refer to Chapter 3 Quick Installation

4.3 Profile

Profile function can help you remember previously connected wireless networks.
You can Edit, Delete or Add profiles in this page (as shown in Figure 4-2) for your convenient
reconnection later on.
Choose - You can choose any one wireless network you want to connect to.

Profile Name - The name you give to your wireless networks. By default, it's the same as root

SSID, but you can change it to any other names that you can easily remember and
distinguish.
Root SSID - the SSID (wireless network name) of your root device, a wireless router or AP.

MAC - The physical address of your root AP, also called BSSID.

300Mbps WiFi Range Extender with Power Outlet Pass-through
Guide.
Figure 4-2 Profile
11