Throughput Monitor - TP-Link TL-WA860RE User Manual

TL-WA860RE
Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected.
Received Packets - packets received by the station.

Sent Packets - packets sent by the station.

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.

4.5.6 Throughput Monitor

Selecting Wireless > Throughput Monitor will helps to watch wireless throughput information in
the following screen shown in Figure 4-19.
Rate - The Throughput unit.

Run Time - How long this function is running.

Transmit - Wireless transmit rate information.

Receive - Wireless receive rate information.

Click the Start button to start wireless throughput monitor.
Click the Stop button to stop wireless throughput monitor.
300Mbps WiFi Range Extender with Power Outlet Pass-through
Figure 4-19 Throughput Monitor
24