Factory Defaults; Backup & Restore - TP-Link TL-WA860RE User Manual

TL-WA860RE
To upgrade the device's firmware, follow these instructions:
1. Download a more recent firmware upgrade file from the TP-LINK website
(http://www.tp-link.com).
2. Enter the path name or click Browse... to select the downloaded file on the computer into the
File blank.
3. Click Upgrade.

Note:
Do not turn off the device or press the Reset button while the firmware is being upgraded. The
device will reboot after the Upgrading has been finished.

4.6.2 Factory Defaults

Selecting System Tools > Factory Default allows you to restore the factory default settings for
the device on the screen shown in Figure 4-22.
Click Restore to reset all configuration settings to their default values.
Default User Name: admin
•
Default Password: admin
•
Default IP Address: 192.168.0.254
•
Default Subnet Mask: 255.255.255.0
•

Note:
Any settings you have saved will be lost when the default settings are restored.
4.6.3 Backup & Restore
Selecting System Tools > Backup & Restore allows you to save all configuration settings to your
local computer as a file or restore the device's configuration on the screen shown in Figure 4-23.
300Mbps WiFi Range Extender with Power Outlet Pass-through
Figure 4-22 Restore Factory Defaults
Figure 4-23 Save or Restore the Configuration
26