Download Print this page

Kenmore 790.4281 Use & Care Manual

Kenmore cooktop user manual
Hide thumbs

Advertisement

Quick Links

®
ELECTRIC
COOKTOP
PARRILLA
COCINAR
Models,
Modelos:
790.4281_,
790.4282_
.,.-'--- C olor number, nL_mero de color
f
LECTRICA
www.sears.com
Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
P/N 318200648 Rev. A (0704)

Advertisement

loading

  Summary of Contents for Kenmore 790.4281

  • Page 1 ® ELECTRIC COOKTOP PARRILLA COCINAR LECTRICA Models, Modelos: 790.4281_, 790.4282_ .,.-'--- C olor number, nL_mero de color www.sears.com Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. P/N 318200648 Rev. A (0704)
  • Page 2: Table Of Contents

    Sears will replace the following range parts free of charge if they fail for the reasons below. After the first year, customer must pay labor cost of installation. • Cooktop glass if it fails due to thermal shock. • Cooktop elements if they are defective.
  • Page 3: Important Safety Instructions

    All other servicing should be done only by a qualified technician to reduce the risk of personal injury and damage to the cooktop. Sears Parts & Repair is the recommended repair service for this appliance. • Never modify or alter the construction...
  • Page 4: Serial Plate Location

    You will find the model and serial number printed on the serial plate. This serial plate is located under the cooktop. See bottom serial plate location.
  • Page 5: Cooktop Features

    READTHESE iNSTRUCTiONS CAREFULLY BEFORE USING THE COOKTOP The Cooking Zones may appear to be cool while turned ON and after they have been turned OFF. The glass surface may be HOT form residual heat transferred from the cookware and burns may occur.
  • Page 6: Surface Cooking

    • Dry immediately and apply a light coating of vegetable oil to griddle before storing. Using the Griddle: Because the g riddle does not lay fiat on the ceramic glass cooktop, it will not work with the Pan Sensing (Sensa Cook) feature.
  • Page 7: Setting Surface Controls

    The ceramic cooktop has radiant surface elements located below the surface of the glass. The design of the ceramic cooktop outlines the area of the surface element underneath. Make sure the diameter of the pan matches the diameter of the element outline on the cooktop.
  • Page 8 CONTROLS LOCK - This feature allows the cooktop to be locked when no cooking zones are active. If the cooktop is in use, it will not be possible to lock the controls. Touch and hold the LOCK key pad for few seconds. A beep will sound and the Lock indicator light will glow (Fig.
  • Page 9 ESEC Lockout Feature ( - - ) The feature will not operate when the Cooktop Lockout feature is active. Whenever the Cooktop Lockout feature is active, " - - " will appear in any display window (See Figure 9). Recommended Surface...
  • Page 10: Operating The Single Radiant Surface Elements

    Radiant Surface The 30" cooktop has 2 SINGLE radiant surface elements: the RIGHT REAR and the LEFT REAR positions (Figure 1); The 36" cooktop has 3 SINGLE radiant surface elements: the RIGHT REAR, the CENTER REAR and the LEFT REAR positions (Figure 2).
  • Page 11: Operating The Dual Surface Element

    _WEj_ key pad to turn off the cooktop. Note: The HE (hot element) message will remain ON if the cooktop is still hot and will remain ON until the heating surface area has cooled sufficiently. Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.
  • Page 12: Operating The Bridge Surface Element

    When cooking has been completed touch the (on/of_pad once to turn the element OFF and if no other surface element is used touch the P_-wE'_ key pad to turn off he cooktop. Note: The HE (hot element) message will remain ON if the cooktop is still hot and will remain ON until the heating surface area has cooled sufficiently.
  • Page 13: Sabbath Feature Mode

    The Cooktop Controls can be locked in order to prevent the cooktop from accidentally being turned ON. This feature can be activated only when no cooking zone is active. If the cooktop is in use, it will not be possible to lock the controls.
  • Page 14: General Care & Cleaning

    General Care & Cleaning Cleaning Various Parts of Your Cooktop Before cleaning any part of the cooktop, be sure all controls are turned OFF and the cooktop is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS DIFFICULTY AND EXTENT OF A MAJOR CLEANING LATER.
  • Page 15: Care And Cleaning Of Stainless Steel

    For light to moderate soil: Apply a few drops of CookTop® Cleaning Creme directly to the cooktop. Use a paper towel or use a non-abrasive type no-scratch pad to clean the entire cooktop surface. Make sure the cooktop is cleaned thoroughly, leaving no residue.
  • Page 16: Before You Call

    Wiring connection is not complete. Call 1-800-4-MY-HOME® for service (see back cover). Power outage. Check house lights to be sure. Call your local electric company for service. Surface element does not No power to the appliance. Check steps under "Entire Cooktop Does Not Operate" in this heat. Before You Call checklist.
  • Page 17: Protection Agreements

    Ilame al 1-800-4- MY-HOME Acuerdos maestros de protecci6n por haber heeho una compra inteligente. Kenmore®est_t disefiado y fabricado para brindarle fiable. Pero, como cualquier producto, preventivo o reparaciones peri6dicas.
  • Page 18: Sears Service

    For repair - in your home - of all major brand appliances, lawn and garden equipment, no matter who made it, no matter who sold it! For the replacement owner's manuals that you need to do-it-yourself. For Sears professional and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, day or night (U.S.A.

This manual is also suitable for:

790.4282Elite 790.4281 seriesElite 790.4282 series