Technical Specifications - ashtech Z-sensor Operation Manual

Technical Specifications

Table 1.1 lists the technical specifications of the Z-receiver.
Characteristic
Tracking
Size
Weight
Operating temperature
Storage temperature
Humidity
Environment
Power consumption
Power input
Interface
C/A (>10° elevation)
• Pseudo-range (raw/smooth)
• Carrier Phase
P-Code AS off (>10° elevation)
• L1 Pseudo-range (raw/smooth)
• L1 Carrier Phase
• L2 Pseudo-range (raw/smooth)
• L2 Carrier Phase
* Refer to "Heat-Sink Requirements" on page 14 for heat sinking information.
Introduction
Table 1.1: Technical Specifications
Z-Sensor
12 channels L1 CA/PL1 and PL2
2.30"H x 6.75"W x 10.31"L
3.75 lb
-30° to +55°C
-40° to +85°C
100%
Resistant to wind-driven rain and
dust to MIL-STD-810E
10—28V
• Three RS-232 ports via a DB-25
connector (one internal RS-232
port)
• One antenna connector
• Event marker and 1PPS via DB-
25 connector
• Optional radio antenna
connector
Measurement Precision
Specifications
Z-Eurocard
0.6"H x 3.9"W x 6.8"L
0.5 lb
-30° to +70°C*
-40° to +85°C
95% non-condensing
N/A
7.5 watts
5V ±5%
• Four RS-232 ports
• One antenna connector
• Event marker
• 1PPS
• Optional radio interface
connector
• 25cm/3.6cm
• 0.9mm
• 15cm/0.9cm
• 0.9mm
• 21cm/1.3cm
• 0.9mm
3