USER MANUAL MODEL 2030 Bidirectional (IEEE-1284) Line Driver/Converter SALES OFFICE Part # 07M2030-B Doc. #102121UB (301) 975-1000 Revised 9/10/97 TECHNICAL SUPPORT C E R T I F I E D (301) 975-1007 An ISO-9001 http://www.patton.com Certified Company...
However, there is no guarantee that interference will not occur in a particular installation. If the Model 2030 does cause interference to radio or television reception, which can be...
Support at (301) 975-1007. 2.1 FEATURES 3.1 CONFIGURATION SWITCHES • Supports Data Rates to 115.2 Kbps The Model 2030 uses a set of eight external DIP switches (see ® • Supports two IEEE 1284 BiTronics Modes: Figure 1) that allow configuration to a wide range of applications.
IEEE 1284 interface does not meet these requirements, you must supply power to the Model 2030 using the option Switches 3 and 4 set the serial data rate for the Model 2030. wall mount AC power supply. Data Rate...
5.0 OPERATION APPENDIX A PATTON MODEL 2030 SPECIFICATIONS Once the Model 2030 is properly configured and installed, it should operate transparently—as if it were a standard cable connection. There is no ON/OFF switch. Transmission Asynchronous, Full Duplex on the serial ®...
Error It is our business to serve you. If you are not satisfied with any nSelectIn aspect of this product or the service provided from Patton Electronics or its distributors, please let us know. Note: All other pins are unconnected Thank you.