Table of Contents
Advertisement
Update Period:The same with the NTP server check interval. Default: 10minutes.
【EMAIL setup】
If the alarm is turned on or the alarm linkage photos are taken, send an email about the alarm
information and the photos to appointed address.
SMTP server:Email server address. It could be an IP address or domain name. Domain name can
be translated only it is the correct DNS configuration.
Port:Email server port number.
SSL:Decide whether using Secure Socket Layer protocol to login.
User Name:Apply the email server user name.
Password:Input the password corresponding to the user.
Sender:Set the email sender address.
Receiver:Send the email to appointed receivers when the alarm is turned on. You can set three
receivers at most.
Title:You can set as you wish.
【IP Filter setup】
When choosing the white list, only the listed IP address can connect the DVR. The 64 IP addressed
are supportive in the list.
When choosing the black list, the listed IP address can not connect the DVR. The 64 IP addressed
Picture 4.21 EMAIL
Page 42
Advertisement
Table of Contents
