Advertisement
B R E W IN G CO F F E E N O W
After completing the steps in the "Adding Water and Ground Coffee" section
1.
and with the decanter and the filter basket securely in place, turn the coffeemaker on.
For Programmable models: Press the ON Button to begin the brewing cycle.
The green indicator light will turn on to signal that the coffeemaker is brewing.
When the brewing cycle is complete the coffeemaker switches over to the
warming mode.
Your coffeemaker will keep your coffee hot for 2 hours, then automatically shut off.
While the coffee is brewing, the Pause n' Serve feture allows you to sneak a cup of
coffee fromthe decanter. REPLACE THE DECANTER ON THE WARMING PLATE
WITHIN 30 SECONDS TO PREVENT OVERFLOW AND POSSIBLE INJURY.
To turn the coffeemaker off, push the OFF button.
For Switch models: Press the ON/OFF Switch on the control panel so the green
indicator light illuminates. The light indicates that the coffeemaker is on and that the
brew cycle will begin.
While the coffee is brewing, the Pause 'n Serve feature allows you to sneak a cup of
coffee from the decanter. REPLACE THE DECANTER ON THE WARMING PLATE
WITHIN 30 SECONDS TO PREVENT OVERFLOW AND POSSIBLE INJURY.
To turn off the coffeemaker, push the switch so the light is no longer illuminated.
If the brew basket overflows or fails to empty into the decanter,
!
do not open the brew basket. Turn off the coffeemaker. Unplug
the coffeemaker and wait for the contents to cool before handling.
2. After the used coffee grounds have cooled, carefully discard them.
3. Make sure the decanter is empty before starting to brew coffee.
4. Be sure to turn your coffeemaker off when no longer using it.
B R E W I N G C O F F E E L A T E R
For Programmable Models Only (Delay Brew)
1. You must first set the time when you would like the coffeemaker to begin brewing
your coffee as described in "Setting the Clock and the Delay Brew Timer" section.
2. Prepare your coffeemaker as described in
3. To activate DELAY BREW and program your coffeemaker to brew coffee at a later
time, press the Delay Brew button. The DELAY indicator light will illuminate. The
coffeemaker is now set to automatically brew coffee at the pre-set later time.
4. At the pre-set time the green indicator light will turn on and the DELAY light will turn
off, indicating the brewing has started.
5. The coffeemaker warming plate will keep your coffee hot for 2 hours and then will
automatically turn off.
As a safety feature, your coffeemaker will NOT start again automatically the next day. If
you want your coffee to brew at the same time the following day, simply add a new filter,
coffee and water and set DELAY BREW, by repeating Steps 2 and 3 above.
To cancel DELAY BREW: Press the OFF button. The DELAY BREW green indicator
light will turn off.
"Adding Water and Ground Coffee" section.
English 7
Advertisement
