Advertisement
SE T T IN G THE C L O C K A N D D E L A Y B R E W T IM E
For Programmable Models Only
To Set the Clock:
1. Plug the power cord into a standard electrical outlet. The clock will flash on the con-
trol panel to indicate that the time has not been set yet.
2. Press and hold the HOUR and MINUTE buttons until you reach the current time. The
PM indicator will light on the left of the display.
NOTE: Pressing any button before setting the clock will cause the clock to start keeping
time from 12:00 a.m. You must set the clock if you want to use the Delay Brew
feature.
To Set the Delay Brew Time:
After setting the clock, simply press and hold the SET DE-
LAY button (Figure 1), and set the brew time by pressing the
HOUR and MINUTE buttons. The PM indicator will light
up on the clock display.
NOTE: To activate the DELAY BREW cycle, see the "Brew-
ing Coffee Later" section.
To check the programmed time, push the SET DELAY but-
ton. The display will show the time you have programmed
the coffee to brew.
P R E P A R I N G F O R U S E
Selecting and Measuring Ground Coffee:
For best results, use a level tablespoon for ground coffee measurement.
Make sure you use medium grind coffee for a perfect brew.
Suggested Coffee Measurement Chart:
To Brew
12 Cups
10 Cups
8 Cups
6 Cups
4 Cups
Ground Coffee
9 tbsp.
7.5 tbsp.
6.5 tbsp.
4.5 tbsp.
3 tbsp.
English 5
1 level tablespoon (tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of brewed coffee
Use more or less coffee to suit your taste.
(Figure 1 – Set Delay)
Advertisement
