Sunbeam's Total Safety System - Sunbeam HE2105 Instruction Booklet

Sunbeam's Total Safety System

Safety auto shut off
Your Sunbeam Compact Oscillating Ceramic
heater is equipped with a safety system that
detects any abnormally high temperatures
within the heater and automatically shuts it
off to prevent overheating. If the heater is
getting excessively hot, an alarm will sound.
Do not operate the heater with the alarm
sounding. Immediately turn the heater off at
the power outlet and check that there aren't
any objects on or around the heater.
This first stage of the safety system requires
the user to manually reset the heater for it to
resume operation.
For instructions on how to reset your heater,
see page 7.
Thermal back-up device
In addition to this automatic shut-off, your
heater contains an over temperature thermal
back-up device to provide additional back-
up protection. If the heater is in an overheat
situation, the back-up device will operate,
stopping the power flow to the element and
fan.
In the event that the back-up device is
activated, the heater will need to be reset.
For instructions on how to reset your heater,
see page 7.
Instant tip over cut out
The instant tip over cut out interrupts the
power to the heating element and fan if the
heater is accidentally tipped over. The heater
will not resume operation until it is replaced
in the upright position.
3