Related Manuals for Sunbeam HE4900
Summary of Contents for Sunbeam HE4900
- Page 1 Euro Plus 2400W Convection Panel Heater Instruction Booklet HE4900 Please read these instructions carefully and retain for future reference.
-
Page 3: Table Of Contents
Contents Sunbeam’s Safety Precautions Safety Precautions for your heater Sunbeam’s Total Safety System Features of your Euro Plus Convection Panel Heater Wall mounting your heater Attaching the wheels Using your heater Restricting the temperature range Resetting the safety auto shut off... -
Page 4: Sunbeam's Safety Precautions
If you have any concerns regarding the performance and use of your appliance, If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. -
Page 5: Important Instructions - Retain For Future Use
If you have any concerns regarding the performance and use of your appliance, If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. - Page 6 Features of your Euro Plus heater Patented SCHWARZ element The patented heating element is designed to heat faster than conventional elements. Its single metal construction ensures optimum heat transfer from the element into the surrounding air, to warm the room faster. Overheat protection The safety auto shut off system detects any abnormally high...
- Page 7 Thermostat dial The thermostat dial allows you to set your desired temperature level. Accurate to within 1°C, the electromechanical thermostat monitors the room’s temperature and continuously adjusts the heat output to maintain your selected comfort level. The element is only powered for as long as necessary to restore the selected temperature, ensuring maximum efficiency.
-
Page 8: Wall Mounting Your Heater
Wall mounting your heater Before using your Euro Plus heater ensure it is securely mounted on a wall. Wall mounting For maximum efficiency this heater should be positioned so that the heat generated mixes with the maximum volume of air. It can be installed in any room of the home, including the bathroom, in accordance with the instructions below. -
Page 9: Attaching The Wheels
Wall mounting your heater (continued) 3. Mark the first top screw location on the wall, at least 630mm from the floor or skirting board. The base of the heater must be at least 200mm from the floor to ensure adequate air flow into the air inlet. Drill the first hole using a suitable drill bit. -
Page 10: Using Your Heater
Using your heater 1. Install the heater in accordance with the instructions above. 2. Insert the plug into a 230-240V power outlet and turn the power on. 3. Ensure that the air inlet vent on the underside of the heater and the air outlet are clear of obstructions. -
Page 11: Resetting The Safety Auto Shut Off
Sunbeam Corporation Limited. Euro Plus is a trademark of Sunbeam Corporation Limited. Made in France. Due to minor changes in design or otherwise, the product you buy may differ from the one shown in this leaflet. - Page 12 (09) 912 0747 www.sunbeam.com.au Consumer information: 1800 025 059 or www.sunbeam.com.au is a registered Trademark of Sunbeam is a registered Trademark of Sunbeam Corporation Limited. ACN 000 006 771. Corporation Limited. ACN 000 006 771. © Sunbeam Corporation Limited 2002.
Need help?
Do you have a question about the HE4900 and is the answer not in the manual?
Questions and answers