Compact ceramic oscillating heater 1800w oscillating heater with ceramic element (12 pages)
Summary of Contents for Sunbeam HE2100
Page 1
Compact Ceramic Oscillating Heater 1800W oscillating heater with ceramic element Instruction Booklet HE2100 Please read these instructions carefully and retain for future reference.
Sunbeam’s Safety Precautions Sunbeam’s Safety Precautions for your Heater 2 Sunbeam’s Total Safety System Features of your Compact Oscillating Ceramic Heater Using your Compact Oscillating Ceramic Heater Using the Oscillation function Resetting the Total Safety System Troubleshooting Guide Care and Cleaning...
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: •...
Sunbeam’s Safety Precautions • This heater becomes hot during use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (90cm) away from the front of the heater and keep them away from the sides and rear.
Sunbeam’s Total Safety System Safety auto shut off Your Sunbeam Compact Oscillating Ceramic heater is equipped with a safety system that detects any abnormally high temperatures within the heater and automatically shuts it off to prevent overheating. If the heater is getting excessively hot, an alarm will sound.
Features of your Compact Oscillating Ceramic Heater Mode button Press the mode button to select the desired operating mode: LOW HEAT, HIGH HEAT AUTO, FAN or STANDBY Fan setting Ideal for circulating cool air in summer, the fan setting operates the fan without heat. Power ON light Illuminates to indicate that the heater is connected to the power outlet.
Page 7
Oscillation function The heater oscillates 90 degrees to provide greater heat distribution. Simply press the oscillation button (OSC) to activate this function. Electronic thermostat The electronic thermostat allows for precise temperature control. Select the auto mode to set the electronic thermostat and turn the thermostat dial to the desired heat setting.
Using your Compact Oscillating Ceramic Heater 1.Place the heater on a flat level surface and ensure that the air intake and outlet are clear of obstructions. 2.Insert the plug into a 230/240V power outlet and turn the power on. 3.The power on light and LCD screen will illuminate.
Using the Oscillation Function The 90 degree oscillation function can be used in any mode except standby. 1. Press the oscillation button (OSC), positioned on the top of the heater. The heater will then begin to oscillate from side to side. Resetting the Total Safety System Resetting the safety auto shut-off The safety auto shut-off detects any...
Troubleshooting Guide If your heater fails to operate check the following: • Make sure the electrical outlet or circuit breaker is working. • Check for obstructions. If you find an obstruction, turn the heater off and follow the reset instructions on page 7. Care and Cleaning Ensure that the heater is switched off and disconnected from the power outlet before...