Philips 200WS8FS/00 Service Manual page 18

18 200WS8 LCD
Fig.1 (Installation interface)
Fig.2
Fig.4
Fig.6
Fig.8
Fig.9
Electronic Instruction
Re-programming Analog DDC
Step 1: After initialize the alignment fixture, connecting all
Monitor(A)
Step 2: Connect the power code of monitor and power on it.
Step 3: Double check the
Step 4: Click the
Step 5: Select the icon of DDC IC type and
Fig.3
Step 6: Entering the monitor's serial number into the block
Step 7: When the DDC data download into the DDC IC, a
Fig. 5
Step 8: Press the OK button, waiting for several seconds
Fig. 7
cables as shown in Fig.10.
PC
Fig. 10
TVI_TOOL
to run the TV_TOOL.exe.
OPEN icon at the main menu
to open the DDC files.
serial number write-in method.
as shown in following photos, program will running
Automatically.
dialog box will be appeared automatically as shown
in below photos.
and then power off the monitor.
Monitor (B)
icon