Philips 200WS8FS/00 Service Manual page 14

14
200WS8 LCD
6. Tear off the adhesive tape and take out the cable from the
sink of main board(note: don't do it forcibly).
Fig. 9
7. Release the two screws on the left side of shielding, then
release the other two screws on the right side of shielding.
Mechnical instructions
Fig. 7
Fig. 8
Fig. 10
Fig. 11
8. Take out the lamp cable shielding and undo the lamp cable.
Fig. 12
9. Tear off the adhesive tape and undo the LVDS cable.
Fig. 13
10. Separate the panel and shielding