Table of Contents
Advertisement
_Pull
the bottom window sash down behind the
upper guide until they meet.
NOTE:
• Do not pull the window sash down so tightly that the
movement of sliders is restricted. Attach the cabinet
to the window inner sill by driving the screws (ITEM F)
through the cabinet into window inner sill.
• The cabinet should be installed with a very slight tilt
downward toward the outside 1/4" from level.
Windowsash
FIG. 10
_
Expand side curtains to fill opening.
Attach each side curtain to the window sash using 4
screws (ITEM G). (FIG. 11)
ITEM G
LowerGuide
FIG. 11
_]
Attach the window locking bracket (ITEM L) with
a screw (ITEM G). See FIG, 12.
FIG. 12
am DRAINAGE
A drain holeis provided at the rear of theair
conditioner u nit.Select a drain method according to
the following.
- Remove the holerubber from the base-pan.
° Connect a drain elbow of 9/16" inside diameter to
the drain pipe.
• Connect a drain hose of 9/16" inside diameter to the
drain elbow, (Drain hose is not supplied.)
FIG. 13
I
I Drain
_]
Dlrbainw" DTrain
hose
_
Slide the air conditioner into the cabinet. (FIG. 14)
CAUTION: For security purposes, reinstall side
screws that were removed in step 1,
Screw
Cord
Screw
FIG. 14
_]Cut
the foam seal (ITEM K) to the proper length
and insert between the upper window sash and the
lower window sash. (FIG. 15)
FIG. 15
_]
Adjust the vent handle before the decorative
front is attached, (FIG, 16)
Straighten the lever, as shown. Pull down part ®to
align with part ®.
Part (_)
Part(_
FIG. 16
-7-
Advertisement
Table of Contents
