To contact SEBO in Canada: SEBO America, LLC Floor Care Equipment, Ltd. Telephone: (800) 334-6614 Telephone: (800) 661-8687 Fax: (303) 792-9196 Fax: (800) 270-4807 Website: www.sebo.us Website: www.sebocanada.ca For Warranty coverage information please refer to your Warranty Card included with your SEBO vacuum cleaner.
15. Do not use vacuum without filter bag and/or filters in place. 31. Use a SEBO power head only in combination with a SEBO 16. Turn off all machine controls before unplugging. vacuum cleaner.
AIRBELT K2: The SEBO AIRBELT K2 is a straight-suction vacu- way, or an excessively dirty micro filter. If the um. As a result, it differs from the AIRBELT K3 in the following vacuum’s airflow pathway becomes restricted two ways: due to a full bag or the existence of a clog, the amber “BAG FULL...
It also has brush height and brush wear warn- AIRBELT K3 provides all the flexibility needed to care for a vari- ing lights. ety of floor surfaces. The parquet nozzle comes standard.
When possible, consult the materials supplied by your flooring manufacturer for infor- mation on proper upkeep and cleaning. To ensure that your new SEBO vacuum cleaner is compatible with your floor, please test the vacuum cleaner on each type of flooring surface in a small inconspicuous area to determine if any damage occurs.
ADDITIONAL OPERATING INSTRUCTIONS FOR K3 WITH POWER HEAD Please refer to your ET-1 power head owner’s manual for more information Starting The Machine and Suction Control - Figures 1, 2, 8, 9 & 10 Before turning on your canister, make sure that the vacuum handle is in its upright locked position (figure 8).
Using the Telescopic Tube, Hose & Attachments - Figures 11 & 12 The telescopic tube (4) is useful for vacuuming corners and hard-to-reach areas. You may use the telescopic tube without a brush, power head or attachment. To remove a brush or power head, switch off the power control knob (9) and unplug the vacuum.
AIRBELT cover around the foam (54) into the opposite groove (56). Continue around the vacuum. Secure the ends with the clip (55). SEBO AIRBELT covers are available in a variety of colors and patterns. See AIRBELT Cover - Part #6047AM/01-08 your SEBO dealer for available selection.
CLOG REMOVAL Always unplug vacuum from outlet before removing any clogs! NOTE! K3 users with ET-1 power heads, please refer to your power head user’s manual for more detailed instructions for removing clogs in your power head. If the “bag full or clog” warning light (10) remains illuminated after the filter bag has been changed and the filters are in good condition, there is likely a clog in the system.
TROUBLE-SHOOTING GUIDE Always unplug vacuum from outlet before dismantling any part of the machine! PROBLEM REASON SOLUTION Does not turn on 1. Telescopic tube not inserted properly. 1. See page 7. 2. Not plugged into working outlet. 2. Use another outlet. 3.
Bag holder, complete 6696AM K Microfilter & Exhaust set 6756GS Bag cover w/castor (10) 6607GS Cover release 6629AM Filter bag SEBO K 6752GS Castor for bag cover 665603E Cord reel w/lever & leaf spring (12&13) 6621 Switch lever w/leaf spring (13) 1739...
Need help?
Do you have a question about the AIRBELT K3 and is the answer not in the manual?
Questions and answers