Table of Contents
Advertisement
RDL-2000
4.5.9
Configure PTP Slave
The following instructions must be performed in the order listed. The configuration listed
here is to facilitate installation only. Refer to your detailed RF plan for any other required
parameter settings.
Start the Link Manager (Start-> Link_Manager-> Link_Manager), click 'S' on
1.
the toolbar to start a session, and login as Admin.
Display the License screen and Drag & Drop the licence file for this MAC
2.
address onto the license screen. Click Submit to activate the license. The
RDL-2000 will automatically reboot.
Important: Exit from the Link Manager after changing the license file, and
then re-start the Link manager application to load the new RDL-2000 settings.
PTP Slave Link Configuration Screen
3.
a. Channel BW (see RF plan).
b. Enable MIMO =
c. Unit Type = PTP Slave
d. Click Submit Parameters (RDL-2000 may automatically reboot).
70-00144-01-01
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Installation Guidelines
Enabled)
(
Figure 29: Link Manager - Slave - Link Configuration Screen
Proprietary Redline Communications © 2011
Page
41
of 52
March 9, 2011
Advertisement
Table of Contents
