Customer Supplied Materials; Table 7: Installation - Customer-Supplied Items - Redline Communications RDL-2000 Installation Manuallines

Broadband wireless radio platform
Hide thumbs Also See for RDL-2000:
Table of Contents

Advertisement

RDL-2000
4.1.2

Customer Supplied Materials

Installation of the RDL-2000 equipment requires additional equipment and materials
supplied by the customer. The following list is provided as a guideline only, and
additional materials may be required based on local conditions at each installation site.
This list is not comprehensive and is provided as a guide only.
#
1
2
3
4
5
6
7
8
70-00144-01-01
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Installation Guidelines

Table 7: Installation - Customer-Supplied Items

Item
Description
Equipment Rack
Mounting space allocated for the PoE power adapter. Must
accommodate 2 m (6') AC power cable and routing of Ethernet cable
from PoE to local Ethernet network access point.
120/240 VAC
Reliable 120/240 VAC. Total power requirements must be
Power
evaluated based on individual site configurations.
Cat-5 Ethernet
Connect from PoE power adapter to core network.
Cables
Cable
Materials for securing cables to mast, protecting cables from
Installation
abrasion, etc. including suggested weatherproofing materials:
Materials
Radio/Antenna
Mast or tower location as required by site survey. Equipment must be
Mast
rated for weight and wind loading of all installed radios and antennas.
Ground Block
Termination for grounding and shield of all conductive cables entering
the building.
Grounding
Master grounding system for all indoor and outdoor equipment,
Wire
with #2 AWG through #6 AWG as required and eye-terminals for
connection to RDL-2000 chassis and mounting bracket.
Tools
i) Equipment to terminate CAT-5 Ethernet cable with RJ-45 connector
(e.g., AMP 2-231652 or equivalent).
ii) Precision set of screwdrivers, cutter pliers, and other common
installation tools.
iii) Portable computer (Windows™) for RDL-2000 configuration,
antenna alignment, and troubleshooting as required.
Proprietary Redline Communications © 2011
Scotch 2200 series of vinyl mastic rolls
Scotch 130C linerless rubber splicing tape
3M Scotch super 88 electrical tape
Rubber mastic putty or duct sealing putty
Page
17
of 52
March 9, 2011

Advertisement

Table of Contents
loading

Table of Contents