SRAM BOXXER TEAM 2015 Service Manual page 21

Use a 24 mm socket to loosen the compression top cap. Remove
4
the Charger Damper assembly from the upper tube.
Clean the upper tube threads with a rag.
5 Use a pick or your fingers to remove the compression top cap
o-ring. Install a new compression top cap o-ring.
Use large internal snap ring pliers to remove the retaining ring
6
from the bottom of the upper tube.
Insert a long dowel into the top of the upper tube and push the
7
lower seal head out the bottom of the upper tube.
24 mm
Snap ring pliers
Charger Damper Removal 21