TROUBLESHOOTING
POSSIBLE PROBLEM
Pulp too wet and
reduced extracted juice
Juice leaks between the
rim of the juicer cover
and the stainless steel
filter disc
28
EASy SOLUTION
•
Try a slower juicing action. Remove juice disc (refer page
9, steps 1 - 8) and thoroughly clean mesh walls with a fine
brush. Rinse juice disc under hot water. If the mesh holes
are blocked, soak the juice disc in a solution of hot water
with 10% lemon juice to unblock the holes or wash in the
dishwasher. This will remove excess fibre build up (from
fruit or vegetables) which could be inhibiting the juice flow.
•
Try a slower juicing action by pushing the food pusher
down more slowly (refer page 14, step 6). Fruit and
vegetables with a high water content (tomatoes and
watermelon) should be juiced on low speed.