Table of Contents
Advertisement
The IBM-3415 will store up to 10 speed dial numbers.
Storing Phone Numbers
1. With the handset in the idle state, press E. The handset will beep.
2. Dial the number you wish to store up to 16 digits
and press E. The handset will beep after each
key is pressed.
Note: A pause can be stored by pressing the F
key where a pause is needed. The pause lasts
for 4 seconds and uses one digit of the 16
digits available.
3. Press the digit location where you wish to store the
number. The handset will give a confirmation tone.
Note: If you make a mistake the handset will give 3
quick beeps to let you know that the number
was not stored.
Making Calls with Speed Dialing
1. Press P. The LED on the handset will flash while
the handset is scanning for a clear channel. The
LED will glow steadily when the connection is
made. Wait until you hear a dial tone.
2. Press E and the location where the number is
stored.
3. When you are finished talking, press the P key or
place the unit back into the base to end the call.
To Delete a Stored Number
1. With the handset in the idle state, press E. The handset will beep.
2. Press F and press E. The handset will beep after each key is pressed.
3. Press the location where you wish to delete the number. The handset will give a
confirmation tone.
SPEED DIALING
17
Talk Key
1
GHI
4
PQRS
7
TONE
Redial Key
REDIAL
IN USE
VOLUME
2
ABC
3
DEF
JKL
MNO
5
6
TUV
WXYZ
8
9
OPER
0
#
Memory
Key
FLASH
Advertisement
Table of Contents
