Wj-Nt104 Setup - Panasonic WJ-NT104 Operating Instructions Manual

WJ-NT104 Setup

First, it is necessary to set an IP address for the WJ-NT104 according to the operating environment. Consult your network
administrator for the address to set.
IP Address Setting via LAN Connection
q On the Location bar, enter http://192.168.0.10/hwset-
up.html to display the ADMINISTRATOR SETUP
PAGE.
To open the ADMINISTRATOR SETUP PAGE, you
need to enter your user ID and password. The default
ID and password are [admin] and [nil], respectively.
Click the [NETWORK] button to display the NETWORK
SETUP dialog box.
w Set IP-ADDRESS, NETMASK, DEFAULT GATEWAY.
Consult your network administrator for the correct set-
tings.
e Specify the TCP/IP settings for the PC.
If the PC is already operating on a network, specify its
original IP address in the TCP/IP Properties dialog box
(before changing it to 192.168.0.9).
12
If the PC is running Windows95 or Windows98, select
Control Panel / Network / Configuration, click the
[Properties] button to open the TCP/ IP Properties
dialog box, and enter the IP address.
r Restart the PC.
t Start the PC's browser.
Specify http://(IP address set in the WJ-NT104)/ in the
Location bar. The connection is established when the
image from the WJ-NT104 is displayed on the PC
screen.