Installation - Lennox Bella Installation And Operation Manual

INSTALLATION

Removing Appliance From Pallet
1. After removing the packaging from the stove, lift the hopper lid, and
remove all prepackaged items that were shipped in the hopper. Next,
open the stove door and remove all prepackaged items.
2. Using a 7/16" socket or wrench, remove the two lag bolts on either
side of the stove and remove brackets by sliding them towards the
center of the unit.
Figure 10 - Removing Stove From Pallet
Installation of Leg Leveling Bolts
An optional leg leveling kit is available. In manufactured home installa-
tions a leg bolt down kit is also required (provided with stove). Install the
leveling legs and bolt down kits per the instructions provided in kits. See
Figure 11 and Page 41 for leveling leg kit ordering information.
G
G.
Manufactured home installations will
also require a bolt down kit which
includes  tie down brackets (provided
with stove)
Figure 11 - Leveling Legs
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
H7638 Leveling Leg Kit (4 per pkg.)
Leveling Legs
-
I
I
(ref. Form # 506033-19)
(ref. Form # 506033-21)
Leveling Legs
9