Table of Contents
Advertisement
CONGRATULATIONS!
When you purchased your new pellet stove, you joined the ranks of
thousands of individuals whose answer to their home heating needs
reflects their concern for aesthetics, efficiency and our environment.
We extend our continued support to help you achieve the maximum
benefit and enjoyment available from your new pellet stove.
Thank you for selecting a Lennox Hearth Products stove as the answer
to your home heating needs.
TABLE OF CONTENTS
Important Safety Information . . . . . . . . . . . . . . . . . . . . Page 2
Packaging List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Testing / Listing, EPA . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3
Planning Your Installation . . . . . . . . . . . . . . . . . . . . . . . Page 3
Selecting a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Floor Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5
Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7
Manufactured Home Installation . . . . . . . . . . . . . . . . . . Page 8
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
Venting Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
Care and Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 19
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 24
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 25
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 31
Component Definitions . . . . . . . . . . . . . . . . . . . . . . . . . Page 32
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 34
Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 41
Safety / Listing Label . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 42
This installation and operation manual will help you obtain a safe, effi-
cient, dependable installation for your appliance and vent system.
PLEASE READ AND UNDERSTAND THESE INSTRUCTIONS
BEFORE BEGINNING YOUR INSTALLATION
PACKAGING LIST
The assembled pellet stove model Bella™ is packaged with an acces-
sory package which contains the following:
One - Power Cord
One - Installation And Operation Manual
One - Warranty
One - Leg Bolt Down Kit (needed for manufactured homes only)
TESTING / LISTING
Listing: The listing laboratory is OMNI-Test Laboratories, Inc., Port-
land, Oregon. The report number is 116-S-53-2 for model Bella pellet
stove.
Testing: In accordance with the specifications and procedures
• Listed and tested to ASTM E1509 & ULC C1482 / ULC S627 for instal-
lations as a freestanding room heater
• The safety/listing label is located on the bottom side of the hopper
lid. Please read this safety label carefully. It contains important
information about installation and operation of this appliance.
• This appliance is tested and listed for residential installation according
to current national and local building codes.
• This appliance is on the Colorado Approved pellet stoves list.
EPA (Environmental Protection Agency)
Status: EPA Certified (method 8) - This appliance has been tested by
Lokee Testing Laboratory, Sumner, Washington to rigorous emissions
standards, and has been certified by the Environmental Protection
Agency.
USING THIS MANUAL
Please read and carefully follow all of the instructions found in this
manual. Please pay special attention to the safety instructions provided
in this manual.
PRODUCT IS SUBJECT TO CHANGE WITHOUT NOTICE
PLANNING YOUR INSTALLATION
Questions To Ask Local Building Official
A correct installation is critical and imperative for reducing fire hazards and
perilous conditions that can arise when wood pellet burning appliances
are improperly installed. The installer must follow all of the manufactur-
ers' instructions.
Page 44
Check all local building and safety codes before
installation. The installation instructions and appro-
priate code requirements must be followed exactly
and without compromise. Alterations to the stove are
not allowed. Do not connect the stove to a chimney
system serving another stove, appliance, or any air
distribution duct. Failure to follow these instructions
will void the manufacturers warranty.
The installation of this appliance must conform to local codes and appli-
cable state and federal requirements. Familiarity with these requirements
before installation is essential. Important considerations to discuss with
local building officials include:
1. Applicable codes (i.e. Uniform Mechanical Code, State or Regional
Codes).
Electrical codes:
In USA, NEC, ANSI/NFPA 70 - Latest Edition
In Canada, CSA C22.1 - Latest Edition
WARNING
3
Hide quick links:
Advertisement
Table of Contents
