Setting Demonstration Mode - Philips DVT4000 User Manual

5
Press + / – to select from the following settings:
(DVT6000 – DVT8000),
Auto Adjust Rec
Tip
• DVT6000 – DVT8000: The device has an integral brightness
sensor. The setting
Auto Adjust Rec
match the brightness of the backlight to the ambient brightness.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.2.4 Setting Demonstration mode
Using Demonstration mode you can display images on the screen.
Note
• The images, with the following properties, must be stored in the
root directory of the device: File format: 24 bit .bmp; resolution:
128 × 160 pixels; File name: 01.bmp, 02.bmp, ... .
Table of contents
(DVT4000),
Off
, , .
8s 20s On
is used to automatically
1
In stop mode (start-up screen), press a/MENU for at least two
seconds.
2
Press a to select the device settings menu Ô.
3
Press h / b to select the function
4
Press the record key, g, to confirm.
5
Press h / b to select the function
6
Press the record key, g, to confirm.
If this feature is on, the saved images are output sequentially
X
to the display.
7
Press the ~ key to end demonstration mode.
8
Press the ~ key to exit the menu.
Tip
• Press the ~ key to cancel the operation without saving and return
to stop mode.
.
Demo Mode
.
On
47
Settings