Audio - Hyundai H-CMMD4042 Instruction Manual

4. Press the buttons on the panel or
to select the desired value.
5. Press PLAY/PAUSE / ENTER / SCAN button to confirm.
TV shape: select the width/height of the image: 16:9 (wide screen), 4:3 (normal view).
This function is not available for some discs.
Angle mark: set the angle indicator mode (when the DVD has multi-angle content): On (view indicator), Off
(don't view indicator).
Press the ANGLE button on the RC to change the angle.
View mode: select the viewing mode: Fill (fill the screen with the picture), Original (original mode), H fit (fit
horizontally), W fit (weight fit), Fit to scrn (fit to screen), Pann & scan (Pan and scan mode).

Audio

Pink noise: use the built in pink noise to adjust each channel output volume or verify if audio output quality is
normal by adjusting the output volume during listening. Select among: Off (don't use pink noise), Left (left
channel pink noise), Center (center channel pink noise), Right (right channel pink noise), Left surr (left
surround channel pink noise), Subwoofer (subwoofer pink noise).
Downloaded from Caradio-Manual.com Manuals
/ buttons on the RC or touch the desired button on the screen
1. Enter the AUDIO menu.
2. Use the buttons on the panel or
the desired item on the screen to select the settings: Pink noise, DRC,
Center delay, Rear delay, Down sampling.
3. Press the buttons on the panel or
touch the desired button on the screen to enter the list of values.
4. Press the buttons on the panel or
touch the desired button on the screen to select the desired value.
5. Press PLAY/PAUSE / ENTER / SCAN button to confirm.
52
/ buttons on the RC or touch
/ buttons on the RC or
/ buttons on the RC or