Image Setting; Parking Cable Function; Monitor Movement Mechanism - Hyundai H-CMMD4042 Instruction Manual

OR press the WIDE/PIC button on the monitor or the WIDE button on the RC repeatedly to select the
aspect ratio: CINEMA => NORMAL => STANDBY.

Image setting

1. Press the PIC button on the RC or press and hold for 2 seconds the WIDE/PIC button on the monitor to
enter the picture quality setting menu.
2. Press the /
CONTRAST, BRIGHT.
3. Press the / button on the RC or the
4. Press the PIC button on the RC or the WIDE/PIC button on the monitor to save changes.

Parking cable function

If the PRK SW cable is connected to hand brake switch, the video view to the TFT
monitor will be switched between Normal display and Caution display. Parking cable
function is ceases if Parking is OFF. Please refer to PARKING.
When Parking is ON the monitor will show the special screen to prevent the driver
watching other content during driving. The passengers at the rear can watch
normally.

Monitor movement mechanism

When any path blocking or obstruction for the movement of the
monitor occurs, the following protection executes to prevent any
damage to the loader or the monitor. After the protection executed
normal operating resumed after the following action of the monitor
performed by pressing the OPEN/CLOSE button or repowering the
Downloaded from Caradio-Manual.com Manuals
button on the RC or the button on the panel to select the setting: COLOR,
button on the panel to adjust the setting.
21