Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents ...2 Important safeguards ...6 Multizone device description ...7 Installation/ connection...8...
Page 3
Touch screen operations ...26 General operations...28 Reset the unit ...28 Power on/off ...28 Volume control ...28 Mute function ...28 Mode selecting ...28 Setting the audio system ...29 Display operations ...30 Auto brightness control...30 Line mute ...30 Digital tuner operations ...31 Mode selecting ...31 Band selection ...32 Manual/ automatic tuning ...32...
Page 4
SD/MMC card ...37 Mode selecting ...37 User touch screen interface ...38 SD card operations...38 Disc operations ...40 Glossary ...40 Discs for playback ...41 Loading a disc ...42 Mode selecting ...42 Playing/ pausing ...42 Stop ...42 Playing the previous/next chapter/track...43 Scanning forward and backward ...43 Slow playback ...43 Alter between 2 Ch and 6 Ch ...44 Repeat playback...45...
Page 5
Changing the subtitle language (for DVD only) ...48 Changing angle (for DVD only)...48 On-screen display (OSD) ...49 MP3/WMA files playback ...50 MP3 overview ...51 System setup menu ...53 Audio sound processing (ASP) configuration...54 General setup...55 RDS setup...56 Screen CAL ...57 DVD setup menu ...58 Language ...59 Video ...59...
Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT PASSENGER COMPARTMENT RECOMMENDED TEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating.
Do not block the cooling fan exit to ensure sufficient heating dissipation of this unit, failure to do this may result in damage to this unit. Multizone device description Multizone definition means the ability of using the head device as the two synchronous signals source. For example by means of the two different signals distribution the user can listen to the radio or see the navigation information on the screen (the first zone), and the back passengers can look the DVD film at the same time (the second zone).
Installation/ connection Method 1 If the meter panel of your car has a two-din dash, and the fireproofing board is capable of screw cap, you could choose this method. 1. Insert mounting bracket (2) into the dashboard (1), select the appropriate tabs and bend them out with a screwdriver.
Page 9
Bend the appropriate tabs to hold the sleeve firmly in place. Note: Locate 12 bend tags along the top, bottom and sides of the mounting sleeve, with the sleeve fully inserted into the dashboard opening, bend as many as of the tags outward as necessary so that the sleeve is firmly secured to the dashboard.
Page 10
Bracket Step 3: Insert head unit into the sleeve Please fix brackets on both sides of the head unit and insert head unit into the mounting sleeve...
Page 11
Step 4: Install trim ring Press tags located in the inside of trim ring to the hole of trim ring, here to. Installations are completed.
Page 13
Note: For your driving safety, please link your parking wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play video disc. Caution: For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit.
Page 14
Parking brake cable connections Note: for safety purpose professional installation for the following connections is recommended. For cars with hand brake For cars with foot brake Rear view video camera...
Unit controls Monitor 1. POWER/MUTE button Press the button to turn the power on, press and hold for 2 seconds to turn the power off. When the power is on press it to cut down the volume output, press it again to resume volume.
Page 16
2. SEL/LOC/DX button Press it (the SEL button) to enter audio setting mode. Press it again or press the the setting. Press the In TUNER (RADIO) mode press it (LOC/DX button) and hold for 2 seconds to select the LOCAL or DISTANT mode for radio station searching.
Page 17
9. PLAY/PAUSE / ENTER / SCAN button In DVD mode press it to start the playback. Press again to pause playback. Press it to resume playback. In the menu press the ENTER button to confirm adjustment. In TUNER (RADIO) mode press the SCAN button to start scan playing of the radio stations. Press and hold it for 2 seconds to preset the radio stations automatically.
17. DVD/2-6CH button Short press to enter DVD mode. Long press to select 2-channel or 6-channel audio in DVD player and SD card reader. 18. OPEN button Short press to slide down/ up monitor. Rear side 19. EJECT button Press this button to eject the disc. 20.
Remote control 1 (general) 1. EJECT button – Open the panel and eject the disc. 2. SRC button - Select the playback source. 3. MUTE button - Toggle on / off volume output 4. POWER button - Turn on / off the power 5.
Page 20
18. DISC button - Select the previous disc to playback in DVDC source (Not supported by this unit). 19. VOL- button - Decrease volume. 20. VOL+ button - Increase volume. 21. STOP/BAND button - stop playback, select FM/AM band. button - Fast forward the current disc in DVD source. During menu setup, move to upper selection. 23.
Remote control 2 (kid zone) 1. MUTE button - Turn on / off volume output. 2. R.SRC button - Playing source selection for rear zone. 3. TITLE button - Enter the title menu of the disc (in DVD Player). 4. MENU button - Enter the main menu of the disc (in DVD Source). Turn on PBC when playing the VCD disc.
Page 22
Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control (pic. 2). Pic.
Monitor operations Open/close TFT monitor Short press OPEN button on the front panel or press the EJECT button of the remote control to open/close the monitor. TFT monitor auto open 1. Press the SYS SETUP button on the RC to enter the System setup menu. 2.
Aspect ratio The aspect ratio alters according to the following while pressing the WIDE button on the front panel or the remote control – FULL -> WIDE -> NORMAL -> OFF. FULL - The screen is extended horizontally as a whole to the aspect ratio of 16 to 9. The extension ratio is the same at any point of the screen.
2. Press the button on the RC or the CONTRAST, BRIGHT, TINT. In NAVI mode, only BRIGHT is available for adjustment. In CVBS mode, PICTURE, COLOR, CONTRAST, BRIGHT and TINT are available for adjustment. 3. Press the buttons on the RC or the 4.
Touch screen operations Press the MENU/SRC button on the panel to get main menu, and you can select a playing source or make setup on system and DVD player by touch button. Touch Operation On DVD Player Positions of touch buttons are showed in the screen, they indicate their functions on DVD player operation.
Page 27
Touch operation on radio Positions of touch buttons are showed in the screen, they indicate their functions on radio operations. Touch operation on SD card Positions of touch buttons are showed in the screen, they indicate their functions on SD card operation.
General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the RESET button on the front panel to restore the unit to the original factory settings. Power on/off Press POWER/MUTE button on the front panel or the POWER button on the RC to turn the unit on.
Then press PLAY/PAUSE button or press the joystick uprightly to enter the selected source. OR press the corresponding button on the monitor: TUNER, SD, DVD. OR press the SRC button on the RC repeatedly to select the source: for the 1 zone –...
Display operations Press the DISP button on the monitor or on the RC to show the playback information on the screen. Auto brightness control To avoid the display being too bright at night time, if the cable for headlight is connected to ILLUMI, turning on the headlight dim the backlight of TFT and vice versa.
Digital tuner operations Note: RDS service is available in M broadcasting only. RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. To activate this function enter the RDS SETUP menu (please refer to SYSTEM SETUP menu chapter of this manual). Mode selecting Press TUNER button on the front panel to switch directly to RADIO TUNER source, or press SRC button on the remote control to switch to RADIO TUNER source, the following user interface appears:...
3. Current radio frequency 4. Clock 5. Indicator for strong signal receipt of local radio station LOC 6. Indicator for receiving the stereo broadcast 7. P1 – P6 – preset radio stations (they are touch buttons), press to recall preset station to playback 8.
Programming tuner stations You can store up to a total of 36 radio stations in the memory (24 FM, 12 AM), manually or automatically. To store a station: Select a band (if needed) Select a station by Hold a Preset button (1-6) that you want store the station for at least 2 seconds. To recall a station: Select a band (if needed) Press a Preset button (1-6) briefly to recall the stored station...
Local radio station seeking (LOC) When the LOCAL function is on only the stations with strong radio signal can be played. 1. Long press the SEL/LOC/DX button on the front panel or LOC button on the touch screen to turn the LOCAL function on.
PTY (Program Type) function Selecting the PTY 1. In TUNER (RADIO) mode press the the PTY function. 2. In PTY mode press the type: None, News, Speech, Music, Document, Fock M, Oldies, Nation M, Country, Jazz, Leisure, Travel, Phone in, Religion, Social, Children, Finance, Weather, Other M, Classics, Light M, Easy M, Rock M, Pop M, Varied, Science, Culture, Drama, Educate, Sport, Info, Affairs, News.
Region function To activate this function enter the RDS SETUP menu (please refer to SYSTEM SETUP menu chapter of this manual). When the AF function is on and REGION is set ON, auto tuning for these stations within the region is assigned. When the AF function is on and REGION is set OFF, auto tuning for these stations without any region is boundary.
User touch screen interface 1. "1/40" – current track/total tracks. "00 : 00 : 27"-current track playback time. 2. "01:08" – clock. 3. "Repeat" - single track repeat playback, it is a touch screen button. "Random" - random playback track, it is a touch screen button.
Page 39
Playback previous/next chapter Press button on the remote control or button on the monitor. Switch the directory Press DIR+/ DIR- button on the touch screen to switch to previous/next directory. Previous/next page Press PAGE+ / PAGE- button on the touch screen to switch to previous/next page. Audio track selection Press AUDIO button on the remote control to alter audio.
Disc operations Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc.
Discs for playback This unit can play disc types: CD/DVD/CDDA/CD-R/-RW/DVD±R/±RW. Compatible with formats: DVD-video/SVCD/VCD/HDCD/MP3/MP4/WMA/Picture-CD/JPEG. The following file types are supported: Audio files: MP3 (*.mp3) WMA (*.wma) Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*.vob) MPEG 1(*.dat) Picture file: JPEG (*.jpg) ISO 9660 or ISO 9660 +Joliet format - Max.
Loading a disc 1. Turn the power on. 2. Press OPEN button on the panel or OPEN/CLOSE on the RC to slide the monitor down, insert the disc into the slot. The monitor will be closed automatically. The unit will switch to DVD mode. 3.
2. Press the STOP/BAND button again to finally stop the playback. If the PLAY/ PAUSE button is pressed, playback will start from the very beginning. Playing the previous/next chapter/track 1. During playback press the current chapter/track from the beginning. Press again to start playback of the previous chapter/track. 2.
Alter between 2 Ch and 6 Ch Each playing source has 2-channels of audio output. Some have 6-channels output. Playing source Channel TUNER 2-Channel 2/6-Channel AUX IN 2-Channel CAMERA 2-Channel SD CARD 2/6-Channel NAVI 2-Channel To select 2- or 6-channel system press the DVD/2-6CH button on the monitor. According to the channel selected and the speaker setup audio output varies according the table: Description 2-channel mode...
Note: the information of the above table is valid only when the setup values of the speakers are low. To set up the speakers please refer to the menu: DVD SETUP => SPK CONFIG. Repeat playback Press the REPT button on the RC once or more to repeat the playback: For VCD/CD: REPEAT SINGLE =>...
GOTO function(for DVD/VCD discs) You can go to the desired track/ chapter or time point directly. 1. During the disc playback press the GOTO button on the RC to enter the Search menu. For VCD discs press the GOTO button repeatedly to select the Track or Disc search. For DVD Search Time...
Direct chapter/ track selection During the CD/VCD playback enter the digits directly to go to the desired chapter/track. For example to enter the 15 track press 1, then 5. Audio track and channel selection (for CD/VCD/DVD discs) For DVD playback: press the AUDIO button to change the audio language. OR enter the AUDIO menu (please refer to DVD SETUP menu chapter of this manual).
PBC (Playback Control) function (for VCD only) If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically. 1. Press MENU button on the RC to activate PBC menu on screen. 2. If the menu consists a list of titles, you can select a desired one using the digit buttons or the the panel or the on the RC.
On-screen display (OSD) 1. During playback press the DISP button on the RC to show the short playback information on display: DVD disc: T-Title (current/total) C – Chapter (current/total) 00:41:28 – Current playback time of the current title 2/6 Eng – the disc has 6 subtitle languages, the current one is the 2 - English.
The playback status will be shown as following (for 6 channels): Front: -current playing source for front zone is DVD Rear: AUX IN - current playing source for rear zone is AUX IN MPEG: a decoding method PLII Music – Prologic II music is applied. The playback status will be shown as following (for 2 channels): Front: -current playing source for front zone is DVD Rear: AUX IN - current playing source for rear zone is AUX IN...
MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard. This product allows playback of MP3 files on DVD-R/-RW, DVD+R/+RW, CD-ROM, CD-R/-RW discs. The unit can read MP3 files written in the format compliant with ISO 9660. However it does not support the MP3 data written by the method of packet write.
Page 52
Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHz and a fixed bit rate o f 128 kbps. DO NOT store more than 448 MP3 files per disc. For ISO 9660 - compliant format, the maximum allowable depth of nested folders is 8, including the root directory (folder).
System setup menu Note: System setup menu is available in TUNER, DVD, AUX IN, TV (optional), SD CARD modes only. In any mode touch the left top corner of the screen to open the MAIN MENU. Use the cursor buttons or press the SETUP button on the screen to open the SETUP menu.
Audio sound processing (ASP) configuration Bass center frequency: select the Bass center frequency according to the audio source disc: 60 Hz, 80 Hz, 100 Hz, 130 Hz, 150 Hz, 200 Hz. Treble center frequency: select the Treble center frequency according to the audio source disc: 10 KHz, 12.5 KHz, 15 KHz, 17 KHz.
General setup Camera: Choose Normal (actual scenes shooting by the camera display in the TFT monitor while reverse driving, just like what you are looking), Mirror (the mirror images of actual scenes display in the TFT monitor while reverse driving, just like looking from the rearview mirror), or OFF item. TV system: adjust the monitor color system according to the video system of the TV attached: Auto (the color signal output is switched automatically according to the recording system of the current disc), NTSC, PAL.
Parking: select the parking image mode: On (image is displayed when the car has been parked only), Off (image is displayed all the time). TFT auto open: set the monitor working mode when the unit is on and off: On (when the unit is off the monitor draws down into the unit automatically, when it’s on the monitor unfurls automatically), Off (when the unit is off the monitor draws down into the unit automatically, when it’s on the monitor unfurls by pressing the OPEN/CLOSE button on the panel), Manual (when the unit is off or on the monitor draws down or unfurls only...
Region: set the Region function: ON (automatically switch to RDS station with same PI), OFF (automatically switch to the station with strong signal). Screen CAL Use the CAL screen when the touch screen is not sensitive or valid. Calibrate it following the clew displayed on the screen after entering the SCREEN CAL mode.
DVD setup menu In any mode touch the left top corner of the screen to display the MAIN MENU. Use the cursor buttons or touch the SETUP button on the screen to open the SETUP menu. In SETUP menu press the buttons on the panel or buttons on the RC or touch the desired item on the screen to select the DVD SETUP (or...
Language Subtitle: set the subtitle mode: English (the subtitle is always in English), Auto (the subtitle is displayed in the language appointed by the DVD disc automatically), Off (No subtitle is displayed). During playback press the SUBTITLE button on the RC to change the subtitle. Audio: select the audio language.
4. Press the buttons on the panel or to select the desired value. 5. Press PLAY/PAUSE / ENTER / SCAN button to confirm. TV shape: select the width/height of the image: 16:9 (wide screen), 4:3 (normal view). This function is not available for some discs. Angle mark: set the angle indicator mode (when the DVD has multi-angle content): On (view indicator), Off (don’t view indicator).
DRC: set the DRC (dynamic range control) for better playback for low volume playback: On (use bass to play the more dynamical audio), Off (normal playback). Center delay: the time difference between center and front speakers. The time delay makes audio signal more accurate.
Stereo: set up the rear speakers: Large (suitable for speakers with good bass output), Small (for speakers with bad bass output), None (rear speaker is not employed). Subwoofer: set up the subwoofer: Large (subwoofer is employed), None (subwoofer is not employed). Center: set up the center speaker: Large (suitable for speaker with good bass output), Small (for speaker with bad bass output), None (center speaker is not employed).
Page 63
Panorama: extend the audio from the front to the rear to achieve a better audio surrounding effect. Panorama is available for adjustment only when PL II music mode is activated. Select the mode: On, Off. Dimension control: adjusting the distribution the front and rear audio output to achieve a better balanced audio surrounding effect.
Rating This unit has the built in parental lock feature to prevent authorized person to view restricted disc content. Password: first set the rating (in RATING setting). Then select the Password setting, press the numeric buttons to set the 4-digit password to protect the parental lock from being changed. Press the PLAY/PAUSE / ENTER / SCAN button to confirm.
Other playback modes AUX-IN mode This mode is for using the unit as an AV signal amplifier or connecting the rear-view camera. Connect the peripheral device (DVD player, video-camera, rear-view camera etc) to the unit via RCA output and AUX in. The unit will be switched into the AUX mode and will show the picture from the device connected.
Rear view video camera This playing source is available only if the rear view video camera is installed properly. Reverse driving activates CAMERA playing mode. Connect the video input cable "CAMERA" with the camera output cable for this function. 1. Press the SYS SETUP button on the RC to enter the System setup menu. 2.
Page 67
DVD unit; 5. Connect control jack in the SMART commutator with navigation control jack in the DVD unit; 6. Short press the MENU/SRC button on front panel to get playback source menu, and press the direction button on the remote control or of the joystick to select a playback source NAVI. Then press PLAY/PAUSE button or press the joystick uprightly to enter the selected source.
Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust.
Troubleshooting guide Cause Symptom No power. The car ignition is not on. The fuse is blown. Disc cannot be loaded. Presence of disc inside the player. Disc cannot be read. Inserting the disc in upside down. Compact disc is extremely dirty or defective.
Specification General Power supply: Current consumption: Maximum power output: Compatible formats: Dimensions (L x W x H) / weight: 185 x 178 x 100 mm / 2.98 kg Working temperature range: ESP function: TFT display Screen diagonal: Resolution: Aspect ratio: Contrast ratio: Brightness: View angle:...
Page 71
AM section Frequency range: Preset memory stations: Audio specification Output: Frequency response: S/N ratio(A-vtd): Line out Output: Specifications are subject to change without notice. Mass and dimension are approximate. 522 kHz - 1620 kHz 2Vrms 20 Hz - 20 KHz (+ 3 dB) 70 dB...
TA ( TUNER ( SEEK, SCAN, AMS PTY ( TUNER ( : None, News, Speech, Music, Document, Fock M, Oldies, Nation M, Country, Jazz, Leisure, Travel, Phone in, Religion, Social, Children, Finance, Weather, Other M, Classics, Light M, Easy M, Rock M, Pop M, Varied, Science, Culture, Drama, Educate, Sport, Info, Affairs, News.