Panasonic HC-X1000 Operating Instructions Manual page 18

Checking the remaining power of the battery
You can check the remaining power of the battery by looking at the battery capacity indication
displayed on this unit's screen or by looking at the supplied battery VW-VBD58.
∫ Checking the remaining power using this unit
Battery capacity indication
≥ The display changes as the battery capacity reduces.
If the battery discharges, then
≥ Depending on the menu setting, the battery capacity indication is not displayed
[DISP SETUP] # [CARD & BATTERY]
∫ Checking the remaining power using the battery
If you press the CHECK button, the remaining power indicator (LED lamp) lights up green, allowing
you to check the remaining power of the battery.
0 100

A CHECK button
B Remaining power indicator
≥ The remaining power of the battery is an approximate guide.
≥ When the LED lamp does not light up even if you press the CHECK button, the battery is
exhausted. Charge the battery.
How to read the remaining power indicator
:Lit up/ :Off
LED lamp status
≥ The display of the remaining power indicator is an approximate guide for the remaining power of
the battery. When the battery pack is connected to the video camera or the charger, refer to the
remaining power display of the connected device. The display of the connected device may differ
from that of the battery pack's remaining power indicator.
will flash red.

% CHECK CHECK
Remaining power of the battery
0% to 25%
25% to 50%
50% to 75%
75% to 100%
- 18 -
# # #
(l
#
155)