Panasonic HC-X1000 Operating Instructions Manual page 169

Problem
Function display
(Remaining Display,
Counter Display, etc.) is
not displayed.
Problem
The unit arbitrarily stops
recording.
Auto Focus function does
not work.
Colour or brightness of
the image changes, or you
may see horizontal bars in
the image.
The LCD monitor flickers
indoors.
Problem
Scenes/still pictures
cannot be played back.
Scenes/still pictures
cannot be deleted.
Indication
≥ [CARD & BATTERY] or [OTHER DISPLAY] of the
[DISP SETUP] is [OFF].
≥ Press the COUNTER button to switch the counter display.
(l 57)
Recording
≥ Use an SD card that can be used for motion picture recording.
(l 20)
≥ The recordable time may have shortened due to the
deterioration of the data writing speed or repeated recording
and deletion. Using the unit, format the SD card.
≥ Switch to Intelligent Auto Mode.
≥ If you are trying to record a scene which is hard to bring into
focus in Auto Focus Mode, use the Manual Focus Mode to
adjust the focus. (l
≥ Colour or brightness of the image may change, or you may
see horizontal bars in the image when the object is recorded
under fluorescent light, mercury light or sodium light, etc., but
this is not a malfunction.
≥ Record images in Intelligent Auto Mode or adjust the shutter
speed to 1/50, 1/60 or 1/100.
≥ Adjust the Synchro Scan shutter speed.
Playback
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be played back.
≥ Release the protect setting.
≥ Any scenes/still pictures where the thumbnails are displayed
as cannot be deleted. If the scenes/still pictures are
unnecessary, format the media to erase the data.
Please be aware that if a media is formatted then all the data
recorded on the media is erased and cannot be recovered.
Back up important data on a PC etc.
- 169 -
Check points
(l 155)
Check points
35, 39)
(l
Check points
(l 88)
(l 30)
52)
(l 30)