Wi-Fi Setting - Panasonic HC-X1000 Operating Instructions Manual

[NUMBER RESET]
Set the file number of the MOV/MP4 and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001.
≥ To reset the folder number, format the SD card, and then perform [NUMBER RESET].
[USB MODE]
The unit's USB terminal to which a USB cable will be connected can be switched.
Switch the terminal according to the shape of the USB cable's plug you intend to connect to the unit.
[DEVICE]: For connecting to the USB terminal (Type Micro-B) of the unit
[HOST]: For connecting to the USB terminal (Type A) of the unit
[SYSTEM INFO]
The version of the firmware of this device is displayed.
[UPDATE]
The firmware of this device is updated.
For the latest update information, check the support website below. (As of September
2014)
http://panasonic.jp/support/global/cs/e_cam
(This Site is English only)
[OPERATION TIME]
The accumulated operating time of this device is displayed.
[LANGUAGE]
You can select the language on the screen display and the menu screen.

Wi-Fi setting

If you press the USER button to which [Wi-Fi] is registered in Recording Mode, you can set items in
the [Wi-Fi Setup] menu. Please refer to page
All default settings are indicated with underlined text.
1
Press the USER button to which [Wi-Fi] is registered, and turn on the Wi-Fi
function.
2
Select the menu.
MENU
: [Wi-Fi Setup] # desired setting
(l
61 for details about setting the USER button.
- 161 -
96)