Yoda VP200 User Manual page 28

Fig 3.7 Setting Page using ordinary pin w
Save Settings : Save Settings :
phone will reboot. Once the phone reboots successfully, the new
configuration is effective.
Note After entering set page, if save settings button is not clicked within 10 minutes,
then when you click it again, the index page asking for pin will pop up again.
Then please input the password again to enter the set page and then click
save settings button to confirm the modification.
Adress Book: Click this button to open the speed dial settings page. Adress Book:
Please refer to Fig 3.
di al number by typing the name into the
the corresponding number following the name.
Click this button to save the configuration and the
7. In this page, you can set and save the speed
i th Debug set as 0 [disable]
Name field and then entering Name
For example, input Jack
- 27 -