Table of Contents
Advertisement
iptype : Set how
iptype
selecting corresponding item from drop down list.
n static
static
ip
ip
:
Select
subnet mask and router IP address of IP phone manually.
n dhcp
dhcp
: Select this item to enable DHCP mode. With this system, y
LAN
or
router
parameters to any device connected to it when
VP200 IP phone
is shipped from the factory with DHCP on. So, if y
LAN or router is configured to use DHCP addressing, the IP pho
LAN parameters will automatically be configured as soon as i
connected to
the LAN or router and powered up.
n pppoe
pppoe Those ADSL and Cable Modem users please select this item f
it is a protocol especially designed for them. With this sys
ADSL ISP automatically assigns all the required IP paramete
any device connected to it when
n modem
modem If the
IP phone used with modem, please select this item
get relevant network parameters auto. Then please fill ID a
into ppp id and ppppin fields.
ppp id: With pppoe
ppp id:
pppoe or modem
enter the user name here.
IP phone gets relevant network parameters
this
item
authorize
automatically
the device log on.
modem selected in
to
users
set
assigns
all
the device log on.
iptype drop down list, please
iptype
by
IP
address,
the
required
' s
- 13 -
netwo
Advertisement
Table of Contents
