Table of Contents
Advertisement
When " nat traversal
nat traversal
stun server into
address : service port
nat ttl:
nat ttl:
When IP phone sit behind a NAT device, it will send packets
to server every
NAT device alive.
default value is 20.
phone number:
phone number:
The local phone number or username of this phone,
usually is allocated by system
account : With SIP system which requires authentication, please put
account
the username/account into this field.
pin: With SIP system which requires authentication, please put the
pin:
password into this field.
register port:
register port:
incoming handshaking messages. The default port number is 5060.
rtp port:
rtp port:
RTP port
packets using UDP protocol.
65535.
tos: Set the TOS field of the IP header of the RTP packets. The bigger
tos:
"
is set to
"
nat addr
nat addr
" , in the format as
" . The default service port for stun is 3478
" nat ttl
nat ttl
" seconds to keep the port mapping on the
" nat ttl
nat ttl
" is an integer betw
.
The local UDP port registered with server to accept
is the port transferring
This is
" stun
stun " , please put the URI of the
and receiving voice
an even number between 1024 and
" domain n
ame/IP
.
een 10 and 65535,
- 23 -
Advertisement
Table of Contents
