Setup - Hoshizaki KMD-410MAH Instruction Manual

* Allow 6" (15 cm) clearance at rear, left side, and top and 12" (30 cm) clearance at right
side for proper air circulation and ease of maintenance and/or service should they be
required.
* Location should provide a firm and level foundation for the equipment.
D. Setup
Do not use the side frame to lift the icemaker. See Fig. 1. Lift the icemaker
from the base.
1) If mounting the unit on top of a storage bin, unpack the storage bin, and attach the four
adjustable legs provided (bin accessory) to the bottom of the storage bin. If mounting
the unit on top of a dispenser, follow the dispenser's setup procedure.
2) Position the storage bin/dispenser unit in the selected permanent location.
3) Place the icemaker on top of the storage bin/dispenser unit.
4) Secure the icemaker to the storage bin/dispenser unit using the two mounting brackets
and the bolts provided. See Fig. 2.
5) Level the icemaker and storage bin/dispenser unit in both the left-to-right and front-to-
rear directions. If using a storage bin, adjust the storage bin legs to make the icemaker
level.
6) Replace the panels in their correct positions.
CAUTION
Mounting
Icemaker
Brackets
Bolts
Bin
Fig. 2
7