Table of Contents
Advertisement
Lower setting produces less saturated colors. If the setting is too high, colors on the image will be
overpowering, which makes the image unrealistic.
Adjusting Tint
Highlight Tint in the PICTURE menu and adjust the values by pressing
control.
The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
Adjusting Sharpness
Highlight Sharpness in the PICTURE menu and adjust the values by pressing
remote control.
The higher the value, the sharper the picture becomes. The lower the value, the softer the picture becomes.
Adjusting BrilliantColor™
Highlight BrilliantColor™ in the PICTURE menu and select by pressing
remote control.
This feature utilizes a new color-processing algorithm and system level enhancements to enable higher
brightness while providing truer, more vibrant colors in picture. It enables a greater than 50% brightness
increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces
images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it,
select Off.
On is the default and recommended selection for this projector. When Off is selected, the Color
Temperature function and 6-axis Color Adjust are not available.
Selecting a Color Temperature
Highlight Color Temperature in the PICTURE menu and adjust the values by pressing
projector or remote control.
The options available for color temperature* settings vary according to the signal type selected.
1.
High: The image becomes tinted with blue. (cold colors).
2.
Middle: The image uses standard colors.
3.
Low: The image becomes tinted with red. (warm colors).
*About color temperatures:
There are many different shades that are considered to be "white" for various purposes. One of the
common methods of representing white color is known as the "color temperature". A white color with a
low color temperature appears to be reddish white. A white color with a high color temperature appears to
have more blue in it.
6-axis Color Adjust
In most installation situations, color management will not be necessary, such as in classroom, meeting
room, or lounge room situations where lights remain on, or where building external windows allow
daylight into the room.
Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or
home theaters, should color management be considered. Color management provides fine color control
adjustment to allow for more accurate color reproduction, should you require it.
Proper color management can only be achieved under controlled and reproducible viewing conditions.
You will need to use a colorimeter (color light meter), and provide a set of suitable source images to
measure color reproduction. These tools are not provided with the projector, however, your projector
supplier should be able to provide you with suitable guidance, or even an experienced professional
installer.
The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each
color, you can independently adjust its range and saturation according to your preference.
If you have purchased a test disc which contains various color test patterns and can be used to test the
color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the
screen and enter the 6-axis Color Adjust menu to make adjustments.
38
/
on the projector or remote
/
on the projector or
/
on the projector or
/
on the
Hide quick links:
Advertisement
Table of Contents
