HP RP3000 Installation Manual page 8

Note: If you are using a RP3000, or the RP5700 computer from HP you will have an additional step:
1. In Windows got to Start.
2. Then Control Panel open Add/Remove programs.
3. You will look for OPOS support for HP mini USB MSR and you will want to remove it.
This application will cause any changes you make to the configuration null.
14. Open the HP MagSwipe Configuration Utility.
15. Select Change Basic Reader Settings and select the
Track Settings tab.
16. Under Track Select, select Track 2 Only.
17. Select Send to MSR.
You should receive notification that the changes were sent
correctly.
8 | P a g e