Setting Auto provisioning Server Address
There are two way to set Auto provisioning Server address. The first one is input address in
menu via the key pad; another one is getting the address by DHCP server with the bootp
option 66.
1
Select "3. APS address" in System Settings' menu.
2
To set the address in manually, choose APS address in the
administrator menu. Three protocols, HTTP, HTTPs and
TFTP are available. Please make sure USE BOOTP 66
option is NO when using in manually setting the address.
To set the address by DHCP BOOTP 66 option, please
3
make empty in the input IP or DNS field. Make USE
BOOTP 66 option filed to YES.
ICW‐1000G will get configuration file from auto‐
provisioning server in the next boot up.
Web Configuration Tool
A PC browser can be used as an alternative to configuring system. Ensure that the PC is
connected to the same AP as the phone and enable <Lock PC Sync>
Menu ‐> Settings ‐> Security ‐> Enter user password ‐> Lock PC Sync ‐> Enable ‐> set the
password for Web Configuration Tool
1. Enter the phone's IP address:8080 in the address bar of the PC's web browser and
press <Enter>
30