Chapter 5 Time - Incom ICW-1000 Global Admin Manual

Time
→ 5. Time
You can set the date and time automatically and manually.
To set Current time automatically select Current time > Time Sever > Start otherwise must set
current time manually. To use NTP server, select Time server and Input the NTP IP in NTP
Server1 and Server2.
We strongly recommend using NTP server. It would be re‐set the time after reboot if
you don't use NTP server.
ICW‐1000G supports 52 0f principal capital cities in the world time. To setup the Time zone
service, select 3.Time Zone and select your location of GMT.
Finally the phone will be rebooted.
To define the Daylight Saving Time, select DST and choose Disable or Enable.
After set Start time, the End time should be settled by time which is applied DST time.
After set DST time will be displayed on the screen.
22
5