Table of Contents
Advertisement
3.1.3 Remove the drive unit (See figure 4)
• Prior to performing the following procedure, remove the top
cover.
• There is no need to remove the front panel assembly.
(1) Disconnect the socket wire from connector
main board.
(2) Disconnect the card wire from connector
digital board.
(3) Remove the four screws C attaching the drive unit.
3.1.4 Remove the digital board (See figure 4)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the card wire from connectors CN2201,
CN1103
on the digital board.
(2) Disconnect the socket wire from connectors CN1101,
CN1102,
CN1801
on the digital board.
(3) Remove the four screws D attaching the digital board.
Digital board
CN1801
on the
CN5302
CN2201
on the
D
D
CN2201
CN1101
Drive unit
D
C
D
C
CN1103
CN1102
Main board
Fig.4
C
C
CN5302
(No.YD058)1-9
Advertisement
Table of Contents
